Dearborn Netbridge Quad CAN Interface

The Netbridge Is A Versatile 4 Channel CAN Interface with Both SAE J2534 and TMC RP1210C Device Drivers for Vehicle Network Communication.

It provides incomparable engineering & development capabilities and access to standards-based vehicle applications commonly used for EOL Testing, ECU prototyping and other development activities.

Netbridge is the perfect device for engineers that prefer to write their own software.

  • Fully supports the SAE J2534 standard for Pass-Thru Reprogramming of OBDII-compliant vehicles and is fully TMC RP1210 A/B/C compliant.
  • Examples of both API’s are easily called by third-party applications like MatLab and LabVIEW using the DLL’s provided with the software.

The Netbridge comes with both a J2534 and RP1210 software packages that can be used right out of the box:

DG DLM 2, a free J2534 CAN-based data monitoring and analysis tool for CAN traffic.
DG Diagnostics, a free RP1210 heavy-duty J1939 diagnostic software package!

Differentiation:

The Netbridge Offers The Lowest Price Per CAN Channel On The Market, Providing A Value-Leading Solution With Fully Functional Network Communications…All In A Single Ruggedized Device.

Features:

  • 4 High-Speed CAN Channels
  • 1 Single Wire CAN Channel (Global A Capable)
  • Multi-Protocol Support – Diagnostics On CAN & J1939
  • RP1210 CAN Auto-Baud Detection (Up to 1Mbps)
  • Selectable Speed of CAN Channels (Up to 1Mbps)
  • Supports RP1210 & J2534 Diagnostics and Reflashing Applications
  • LED Indicators for Each CAN Channel
  • Pin Assignment Label for Easy Configuration
  • High-Speed USB Communication to PC
  • Rugged Aluminum Housing; Protective Rubber Bumpers

Functionality:

  • Transmits and receives messages on 4 CAN channels enabling vehicle network development activities.
  • Sends and receives messages over the data bus using a USB cable connection to the Netbridge that communicates with a DUT, vehicle network or test fixture using an open ended 25 pin DB cable.

Benefits:

  • Simultaneous Data Transmission and Reception On All CAN Channels
  • Validated and Tested for Use On High Bandwidth CAN Networks
  • Common Timestamps On All CAN Channels (100 micro-seconds)
  • Software to Validate Connectivity to Networked Devices (J2534 & RP1210)
  • Compatible with LabView and Matlab
  • Easy to Write Software
  • Complete J2534 and RP1210 Sample Source Code
  • Load DLL, Connect, Read, Write, Close
  • Electrically Hardened (Reverse Polarity, Transients)
  • Worry-Free, Industry-Best 2 Year Warranty!

Specifications:

CAN Channel Information

The Netbridge has 4 High Speed (HS) CAN channels that are in compliance with the ISO11898-2 specification. The SW CAN channel is in compliance with the J2411 specification.

J2534 Defined Protocols Supported

CAN, CAN_PS
CAN_CH1, CAN_CH2, CAN_CH3, CAN_CH4
ISO15765, ISO15765_PS, ISO15765_CH1, ISO15765_CH2, ISO15765_CH3, ISO15765_CH4
SW_CAN_PS, SW_ISO15765_PS
J1939, J1939_CH1, J1939_CH2, J1939_CH3, J1939_CH4

RP1210 Protocols Supported

CAN
125k, 250k, 500k, 1Mbit, Automatic Baud Rate Detection Capable
J1939
125k, 250k, 500k, 1Mbit, Automatic Baud Rate Detection Capable
ISO15765
125k, 250k, 500k, 1Mbit, Automatic Baud Rate Detection Capable

Operating Systems Supported for J2534 and RP1210 Drivers

Windows XP®
Windows Vista® 32-bit and 64-bit Versions
Windows 7® 32-bit and 64-bit Versions
Windows 8® 32-bit and 64-bit Versions